Suzuki Grand Vitara: Tire Changing Tool
Tire Changing
Tool
The jack, wheel brace and jack handle are stowed in the rear left corner of the luggage compartment. Remove the cover to access the tools. To remove the jack, turn its shaft counterclockwise and pull the jack out of the storage bracket. To stow the jack, place it in the storage bracket and turn the shaft clockwise until the jack is securely held in place.
WARNING: The jack should be used only to change wheels. It is important to read the jacking instructions in the “EMERGENCY SERVICE” section of this manual before attempting to use the jack.
WARNING: After using the jack, extension rod and lug wrench, be sure to stow them securely, or they could be thrown about in an accident, causing injury.
Frame Hooks
Front Rear Frame hooks are provided at the front and rear of the vehicle. To access the front hook, unhook the lower part of the cover (1) and then remove the cover (1). WARNING: Do not use th ...Shopping Hook (if equipped)
Shopping Hook (if equipped) The shopping hooks are located on both sides of the luggage compartment. You can hang the shopping bag or other suitable objects on the hook. This hook is not desig ...See also:
Two-Wheel Drive (2WD) models
Two-Wheel Drive (2WD) models
NISSAN recommends that your vehicle be
towed with the driving (front) wheels off the
ground or place the vehicle on a flat bed truck as
illustrated.
- Never ...
Bulb replacement
Headlamp
1. Open the hood.
2. Reach behind the headlamp unit in the engine compartment
to access the headlamp bulb lock ring.
3. Firmly grasp the lock ring on the back of the headlamp
unit ho ...
iPod Error Messages
If you see an error message on the
screen while playing an iPod, find
the solution in the chart to the right.
If you cannot clear the error
message, take your vehicle to your
dealer.
...