Range Rover Evoque: System fault

If a system fault is detected, a continuous tone will sound and a message will be displayed in the message centre. Contact your Dealer/ Authorised Repairer as soon as possible.

READ NEXT:

 Sensor care

When washing the vehicle do not aim high pressure water jets directly at the sensors. Do not use abrasive materials or hard/sharp objects to clean the sensors. Only use approved vehicle shampo

 Touch screen

 Touch screen overview

Note: Physical controls are referred to as hard keys. Virtual buttons on the touch screen are referred to as soft keys. Screen options will vary depending on vehicle specification and set-up. T

SEE MORE:

 Suspension Top Mount

Removal NOTES: The suspension top mount is manufactured from mild steel and RP220. The service panel is serviced not fully spot welded. The panel is serviced less its weld studs 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment jig. 2.

 Foot brakes

Do not rest your foot on the brake pedal while the vehicle is in motion. Never allow the vehicle to coast (freewheel) with the engine turned off. The engine must be running to provide full braking assistance. The brakes will still function with the engine off, but far more pressure will be

© 2011-2024 Copyright www.rrevoque.org