Volvo XC60: Switching BLIS on and off - Blind Spot Information System - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Switching BLIS on and off

BLIS is automatically activated when the ignition

BLIS is automatically activated when the ignition is switched on. The indicator lights will provide confirmation by flashing 3 times.

• The system can be switched off by pressing the BLIS button in the center console (see the illustration). The indicator light in the button goes out when the system is switched off, and a text message is displayed.

• BLIS can be switched on again by pressing the button. The indicator light in the button will illuminate and a new text message will be displayed. Press the READ button (see page 131) to erase the message.

Depending on the vehicle's optional equipment, there may not be space for the BLIS button in the center console. In this case, BLIS can be switched on and off in the menu system by pressing MY CAR and going to Settings Car settings Car settings BLIS. See page 134 for a BLIS. See page 134 for a description of the menu system.

BLIS system messages

Passenger compartment convenience

    Cleaning the BLIS camera lenses
    In order to function optimally, the BLIS camera lenses must be kept clean. They can be wiped clean with a soft cloth or wet sponge. CAUTION • Clean the lenses carefully to avoid scratching. ...

    See also:

    Malfunction Indicator Lamp
    If the indicator comes on while driving, it means one of the engine’s emissions control systems may have a problem. Even though you may feel no difference in your vehicle’s performance ...

    Traction Grades
    The Traction grades, from highest to lowest, are AA, A, B, and C. These grades represent the tire’s ability to stop on wet pavement, as measured under controlled conditions on specified govern ...

    Loading Discs in the In-dash Disc Changer
    Your vehicle’s in-dash disc changer holds up to six discs. 1. Press the LOAD button until you hear a beep and see ‘‘LOAD’’ on the display. To load only one CD, press and release th ...