Ford Escape: Stowing the jack and tools
• Make sure the jack is fully
lowered.
• Reclip the tools onto the jack
making sure that the tools are
fully contained by the clips as
shown.
• Reinstall the jack in the pocket
with the left side first, then snap
the right side down.
• Ensure that the hold-strap contains the jack and tools before snapping
the buckle.
• Ensure that the jack and tools are oriented as illustrated.
Tire change procedure
WARNING: When one of the front wheels is off the ground, the transmission alone will not prevent the vehicle from moving or slipping off the jack, even if the vehicle is in P (Park) (automatic tra ...Stowing the flat/spare tire
Note: Failure to follow spare tire stowage instructions may result in failure of cable or loss of spare tire. If you are stowing a tire that requires reattaching it to the vehicle with a tether, pe ...See also:
Shift Positions
The transfer case switch is located on the center console
next to the shift lever.
Transfer Case Switch
2WD
Rear Wheel Drive High Range - This range is for normal
street and highway driving o ...
Continuous wiping
The wipers operate at normal speed.
The wipers operate at high speed. ...
Gauges
Speedometer The speedometer indicates the forward speed of the vehicle. Tachometer
The tachometer indicates the approximate number of engine revolutions per minute
(rpm). Use the tachometer to sel ...