GMC Terrain: Shoulder Belt Height Adjuster - Lap-Shoulder Belt - Safety Belts - Seats and Restraints - GMC Terrain Owner's ManualGMC Terrain: Shoulder Belt Height Adjuster

The vehicle has a shoulder belt height adjuster for the driver and right front passenger seating positions.

Adjust the height so the shoulder portion of the belt is on the shoulder and not falling off of it. The belt should be close to, but not contacting, the neck. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. See How to Wear Safety Belts Properly on page 3‑13.

Move the height adjuster up to the desired position by pushing up on the height

Move the height adjuster up to the desired position by pushing up on the height adjuster.

After the height adjuster is set to the desired position, try to move it down without pressing the release button (A) to make sure it has locked into position. Press the release button to lower the height adjuster.

    Lap-Shoulder Belt
    All seating positions in the vehicle have a lap-shoulder belt. The following instructions explain how to wear a lap-shoulder belt properly. 1. Adjust the seat, if the seat is adjustable, so you can ...

    Safety Belt Pretensioners
    This vehicle has safety belt pretensioners for front outboard occupants. Although the safety belt pretensioners cannot be seen, they are part of the safety belt assembly. They can help tighten the ...

    See also:

    Brake system
    The brake system is a hydraulic system consisting of two separate brake circuits. If a problem should occur in one of these circuits, it is still possible to stop the vehicle with the other br ...

    Start guidance
    After touching Destination, the system will calculate the route. There is now a choice to select 3 Routes, Change route or to Start navigation guidance. Touch 3 Routes to display a choice of three ...

    Battery
    ■ Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. 1 Terminals 2 Hold-down clamp ■Before rech ...