Toyota RAV4: Setting automatic connection of the device on or off
If “BT Power” is set to on, the registered device will be connected automatically when the engine switch is turned to the “ACC” position.
1 Select “BT Power” using .
2 Select “ON” or “OFF” using .
Changing the passkey
1 Select “Passkey” using . 2 Select a 4 to 8-digit passkey using . Input the number 1 digit at a time. 3 When the entire number to be registered as a passkey has been input, press again. I ...Displaying the device status
Select “Bluetooth info” using . ● Displaying the device name Select “Device Name” using . ● Displaying the device address Select “Device Address” using . ...See also:
Owner maintenance
Any significant or sudden
drop in fluid
levels, or uneven tyre wear, should be
reported to a qualified technician
without delay.
In addition to the routine maintenance, a
number of simple chec ...
The alarm system
The alarm is automatically armed whenever the
vehicle is locked with the remote key or
optional Personal Car Communicator.
When armed, the alarm continuously monitors
a number of points on the ...
Removing the headlight housing
1. Switch off the ignition by briefly pressing
the START/STOP ENGINE button.
2. Remove the remote key from the ignition
slot1.
3. (Upper illustration under "Headlight housing").
&nb ...