Toyota RAV4: Selecting and scanning a folder
■ Selecting folders one at a time
Press ( < ) or ( > ) to select the desired folder.
■ Selecting a folder and file from folder list
1 Press .
The folder list will be displayed.
2 Turn and press to select a folder and a file.
To return to the previous display, press (BACK).
■ Returning to the first folder
Press and hold ( < ) until you hear a beep.
■ Scanning a folder
1 Press and hold until you hear a beep.
The first 10 seconds of the first file in the each folder will be played.
2 When the desired folder is reached, press again.
Selecting and scanning files
■ Selecting one file at a time Turn or press “∧” or “∨” on to select the desired file. ■ Selecting the desired file by cueing the files in the folder Press When ...See also:
Jump starting
Connecting the jumper cables
Follow these instructions to jump start your
vehicle's dead battery or to jump start another
vehicle's dead battery using your vehicle. If the
12-volt auxiliary b ...
Notes on driving
If the vehicle is heavily laden, check the tire pressures and correct them
if necessary.
When parking your vehicle, make sure that the tires do not get deformed
by the curb or other obstacl ...
Connecting USB storage device / iPod®
Do not operate an iPod® while
driving; it may distract your attention
from driving and can lead to an
accident.
- If the data stored in an iPod® is
deleted while it is connected to ...