Toyota RAV4: Second center seat belt
The second center seat belt is a 3-point type restraint with 2 buckles. Both seat belt buckles must be correctly located and securely latched for proper operation.
Make sure that the buckle 1 is
securely latched ready for use of
the center seat belt.
1 Tab “A”
2 Tab “B”
■ Releasing method
The second center seat belt can be completely released only when necessary such as when folding down the second seats.
To release the tab “A”, insert the tab “B”, key (vehicles without a smart key system) or mechanical key (vehicles with a smart key system) into the hole on the buckle. Retract the belt slowly when releasing and stowing the seat belt.
Stow the seat belt tabs in the cover located on the roof as shown.
Seat belts
Make sure that all occupants are wearing their seat belts before driving
the vehicle.
■ Correct use of the seat belts
● Extend the shoulder belt so
that it comes fully over the
shou ...
Seat belt pretensioners (front seats)
The pretensioner helps the seat
belt to quickly restrain the occupant
by retracting the seat belt
when the vehicle is subjected to
certain types of severe frontal
collision or a vehicle rollove ...
See also:
Modification of your vehicle
Your vehicle should not be modified
other than with genuine SUBARU
parts and accessories. Other types
of modifications could affect its
performance, safety or durability,
and may even vi ...
Manual Front Seat Adjustments
For models equipped with manual seats, the driver and
passenger seats can be adjusted forward or rearward by
using a bar by the front of the seat cushion, near the floor
Manual Seat Adjustment
...
Bulb replacement
Headlamp
1. Open the hood.
2. Reach behind the headlamp unit in the engine compartment
to access the headlamp bulb lock ring.
3. Firmly grasp the lock ring on the back of the headlamp
unit ho ...
