Mitsubishi Outlander: Seat belt inspection
● Check the belts for cuts, worn or frayed webbing and for cracked or deformed metallic
parts. Replace the belt assembly if defective.
● A dirty belt should be cleaned with neutral detergent in warm water. After rinsing
in water, let it dry in the shade. Do not attempt to bleach or re-dye the belts
because this affects their characteristics.
WARNING:
● We recommend you to have all seat belt assemblies including retractors and attaching
hardware inspected after any collision. We recommend that seat belt assemblies in
use during a collision be replaced unless the collision was minor and the belts
show no damage and continue to operate properly.
● Do not attempt to repair or replace any part of the sat belt assemblies; we recommend
you to have this work done by a MITSUBISHI MOTORS Authorised Service Point. Incorrect
repair or replacement result in serious injury in the event of a collision.
● Once the pre-tensioner has activated, it cannot be re-used. It must be replaced
together with the retractor.
Child restraint
When transporting children in your vehicle, some type of child restraint system should always be used according to the size of the child. This is required by law in most countries. The regulations ...Supplemental restraint system (SRS)-airbag
The information for SRS airbags includes important information concerning the driver’s and front passenger’s airbags, the side airbags and the curtain airbags. The SRS airbags are designed to ...See also:
Trailer Sway Control (TSC)
The vehicle has a Trailer Sway Control (TSC) feature as part of the StabiliTrak
system. If TSC detects that the trailer is swaying, the vehicle's brakes are automatically
applied.
When TSC ...
Supervisor screen controls
Supervisor screen controls
See 104, TOUCH SCREEN OVERVIEW.
1. Select rear media.
2. Current rear media display.
3. Left screen select.
4. Right screen select.
5. Settings screen.
6. Remote co ...
Locking
1. Switch off the engine (see page 114 for
details).
2. Remove the remote key from the ignition
slot.
3. Open the driver's door.
> A sound will be audible when the steering
wheel lock enga ...