Mercedes-Benz GLK-Class: Replacing the rear window wiper blade
Removing the wiper blade
- Remove the SmartKey from the ignition lock.
- Fold wiper arm 1 away from the rear window until it engages.
- Position wiper blade 2 at a right angle to wiper arm 1.
- Hold wiper arm 1 and press wiper blade 2 in the direction of the arrow until it releases.
- Remove wiper blade 2.
Installing the wiper blade
- Place new wiper blade 2 onto wiper arm 1.
- Hold wiper arm 1 and press wiper blade 2 in the opposite direction to the arrow until it engages.
- Make sure that wiper blade 2 is seated correctly.
- Position wiper blade 2 parallel to wiper arm 1.
- Fold wiper arm 1 back onto the rear window.
Replacing the windshield wiper blades
Removing the wiper blades Before changing the wiper blades, always set the wiper arms to a vertical position using the combination switch. There is otherwise a risk of damaging the hood. Moving ...Problems with the windshield wipers
The windshield wipers are obstructed Leaves or snow, for example, may be obstructing the windshield wiper movement. The wiper motor has been deactivated. For safety reasons, you should remove t ...See also:
Operating tips
- When the selector lever is shifted to the R
(Reverse) position, the monitor screen automatically
changes to the RearView Monitor
mode. However, the radio can be heard.
- It may take some time ...
Fog Lamps
To replace one of these bulbs:
1. Locate the fog lamp assembly under the front facia.
2. Disconnect the bulb socket from the electrical connector, turn, and pull out
the bulb assembly.
3. Remov ...
Front-side view
Front-side view
Guiding lines:
Guiding lines that indicate the width and the
front end of the vehicle are displayed on the
monitor.
The front-of-vehicle line 1 shows the front part
of the v ...