Ford Escape: Replacing high-mount brake lamp bulbs - Replacing headlamp bulbs - Bulb Replacement - Lights - Ford Escape Owner's ManualFord Escape: Replacing high-mount brake lamp bulbs

1. Remove the two screws and move the lamp assembly away from the liftgate.

2. Remove the bulb holder from the

2. Remove the bulb holder from the lamp assembly by pressing the snaps.

3. Pull the bulb straight out of the

3. Pull the bulb straight out of the socket and push in the new bulb.

Install the new bulbs in reverse order.

Replacing license plate lamp bulbs

    Replacing tail/stop/turn/backup lamp bulbs
    The tail/stop/turn/sidemarker/backup lamp bulbs are located in the same portion of the tail lamp assembly, one just below the other. Follow the same steps to replace either bulb: 1. Make sure the ...

    Replacing license plate lamp bulbs
    1. Make sure the headlamp switch is in the off position. 2. Press the lever and carefully pry the license plate lamp assembly (located above the license plate) from the liftgate. 3. Rotate the b ...

    See also:

    Current speed in mph (Canadian models only)
    This function provides the driver with an instantaneous conversion of the car's current speed from km/h to mph. ...

    Steering wheel controls (if equipped)
    Radio control features VOL + (Volume): Press to increase the volume. VOL – (Volume): Press to decrease the volume. (Seek): Press to select the previous/next radio station preset, CD track or ...

    StabiliTrak® System
    The StabiliTrak system assists with directional control of the vehicle in difficult driving conditions. The system is on when the vehicle is started. ○ To turn off both Traction Control and S ...