Volvo XC60: Removing the ball holder
1. Remove the cotter pin from the locking bolt and slide the locking bolt out of the ball holder/hitch assembly.
2. Pull the ball holder out of the hitch assembly.
NOTE
A cover for the hitch assembly is also
included in the kit.
Installing the ball holder
1. If necessary, remove the cotter pin from the locking bolt and slide the locking bolt out of the hitch assembly. 2. Slide the ball holder into the hitch assembly. 3. Align the hole in the ball ...Trailer Stability Assist (TSA)
Trailer Stability Assist is a system designed to help stabilize a vehicle that is towing a trailer when the vehicle and trailer have begun to sway and is part of the Dynamic Stability and Trac ...See also:
How to Check
Use a good quality pocket-type gauge to check tire pressure. Proper tire inflation
cannot be determined by looking at the tire. Check the tire inflation pressure when
the tires are cold, meaning t ...
Pedal travel (China)
Both the brake and clutch pedal travel are set at
the factory and are non-adjustable. ...
Panic alarm
To activate: press button
1 for at least one second.
An alarm sounds and the exterior lighting flashes.
To deactivate: press button
1 again.
or
Insert the SmartKey into the ign ...