Subaru Forester: Reclining the seatback
Reclining the seatback
Pull the reclining lever up and adjust the seatback to the desired position. Then release the lever and make sure the seatback is securely locked into place.
The seatback placed in a reclined position can spring back upward with force when the lever is pulled. While operating the lever to return the seatback, hold the seatback lightly so that it may be raised back gradually.
To prevent the passenger from sliding under the seatbelt in the event of a collision, always put the seatback in the upright position while the vehicle is in motion. Also, do not place objects such as cushions between the passenger and the seatback. If you do so, the risk of sliding under the lap belt and of the lap belt sliding up over the abdomen will increase, and both can result in serious internal injury or death.
Forward and backward adjustment
Forward and backward adjustment Pull the lever upward and slide the seat to the desired position. Then release the lever and move the seat back and forth to make sure that it is securely lock ...Seat cushion height adjustment (driver’s seat)
Seat cushion height adjustment (driver’s seat) 1) When the lever is pushed down, the seat is lowered. 2) When the lever is pulled up, the seat rises. The height of the seat can be adjusted ...See also:
Rear window wiper blade
Contact a NISSAN dealer if checking or
replacement is required. ...
Using Operator Mode
If the Sky Sliderâ„¢ is open from the front, press the switch
forward and hold it, the Sky Sliderâ„¢ will move forward.
Release the switch to stop the Sky Sliderâ„¢ travel at any
point.
If the S ...
Replacement parts
Use of genuine MOPAR parts for normal/scheduled
maintenance and repairs is highly recommended to ensure
the designed performance. Damage or failures
caused by the use of non-MOPAR parts for main ...