Nissan Rogue: Precautions on cruise control
- If the cruise control system malfunctions, it will cancel automatically. The SET indicator on the vehicle information display will then blink to warn the driver.
- If the engine coolant temperature becomes excessively high, the cruise control system will cancel automatically.
- If the SET indicator on the vehicle information display blinks, turn the cruise control main switch off and have the system checked by a NISSAN dealer.
- The SET indicator on the vehicle information display may blink when the cruise control main switch is turned ON while pushing the ACCEL/RES, COAST/SET or CANCEL switch. To properly set the cruise control system, perform the following procedures.
Do not use the cruise control when
driving under the following conditions:
- when it is not possible to keep the
vehicle at a set speed
- in heavy traffic or in traffic that
varies in speed
- on winding or hilly roads
- on slippery roads (rain, snow, ice,
etc.)
- in very windy areas
Doing so could cause a loss of vehicle
control and result in an accident.
Cruise control
...Cruise control operations
1. ACCEL/RES switch 2. COAST/SET switch 3. CANCEL switch 4. MAIN (ON·OFF) switch The cruise control allows driving at a speed between 25 to 89 MPH (40 to 144 km/h) without keeping your f ...See also:
Damage
Periodically inspect the tire treads and sidewalls for damage (such as
bulges in the tread or sidewalls, cracks in the tread groove and
separation in the tread or sidewall). If damage is observed or ...
Certification Label
As required by National Highway Traffic Safety Administration
regulations, your vehicle has a certification label
affixed to the driver’s side door or B-Pillar.
This label contains the month an ...
Indicator lights
All-Wheel Drive (AWD) LOCK indicator light (AWD model)
This light illuminates when the ignition switch is
turned to the ON position, and turns off within 1
second.
When selecting the LOCK mode ...