Volvo XC60: Park position (P)
Select the P position when starting or parking.
Shiftlock
When P has been selected, the transmission is mechanically blocked in this position. The brake pedal must be depressed and the ignition must be in at least mode II (see page 82) before the gear lever can be moved from the P position.
Always apply the parking brake when the vehicle is parked. Press the control to apply the brake, see page 122.
CAUTION The vehicle must be stationary when position P is selected.
Automatic transmission
Shiftgate positions
Depress the button on the front of the gear
selector knob to move the gear selector
between the R, N, D, and P positions.
The gear selector can be moved freely between
th ...
Reverse ®)
The vehicle must be stationary when position
R is selected. ...
See also:
Important safety notes
WARNING
Gasoline is highly flammable and poisonous. It burns violently and can cause
serious personal injury.
Never allow sparks, flames or smoking materials near gasoline.
Turn off the engi ...
Vehicle identification
■ Vehicle identification number
The vehicle identification number (VIN) is the legal identifier for your
vehicle. This is the primary identification number for your Toyota. It is
used in regi ...
Introduction
Certain models are equipped with a tire sealing
system* that enables you to temporarily seal a
hole in the tread surface and re-inflate a flat tire,
or to adjust a tire’s inflation pressure.
...
