GMC Terrain: Park Brake and P (Park) Mechanism Check
WARNING
When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll. Be ready to apply the regular brake at once should the vehicle begin to move.
Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake.
○ To check the parking brake's holding ability: With the engine running and the
transmission in N (Neutral), slowly remove foot pressure from the regular brake
pedal. Do this until the vehicle is held by the parking brake only.
○ To check the P (Park) mechanism's holding ability: With the engine running, shift
to P (Park). Then release the parking brake followed by the regular brake.
Contact your dealer if service is required.
Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. ○ The ignition should turn to LOCK/OFF only when the shift lever is in P (Park ...Wiper Blade Replacement
Windshield wiper blades should be inspected for wear and cracking. See Maintenance Schedule on page 11‑3 for more information. Replacement blades come in different types and are removed in di ...See also:
Installing the ball holder
1. If necessary, remove the cotter pin from
the locking bolt and slide the locking bolt
out of the hitch assembly.
2. Slide the ball holder into the hitch assembly.
3. Align the hole in the ball ...
Cruise control operations
1. ACCEL/RES switch
2. COAST/SET switch
3. CANCEL switch
4. MAIN (ONВ·OFF) switch
The cruise control allows driving at a speed
between 25 to 89 MPH (40 to 144 km/h)
without keeping your f ...
Dynamic stability control off (amber)
Dynamic stability control off (amber)
Illuminates when DSC is switched
off.
Deactivating DSC also reduces the
level of Electronic Traction Control intervention
and may lead to an increase in wh ...