Jeep Liberty: Operation Instructions - Auxiliary Mode
The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers.
Pressing the DISC/AUX button will change the mode to auxiliary device if the AUX jack is connected.
NOTE: The AUX device must be turned on and the device’s volume set to proper level. If the AUX audio is not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume down.
TIME Button (Auxiliary Mode)
Press this button to change the display to time of day. The time of day will display for five seconds (when ignition is OFF).
Playback of MP3 Files
When a medium containing MP3 data is loaded, the
radio checks all files on the medium. If the medium
contains a lot of folders or files, the radio will take more
time to start playing the MP3 fi ...
Media Center 130 With Satellite Radio (Sales Code RES+RSC)
NOTE: The radio sales code is located on the lower right
side of the radio faceplate.
Media Center 130 (RES/RSC) ...
See also:
Owner Checks and Services
At Each Fuel Stop
○ Check the engine oil level. See Engine Oil on page 10‑10.
Once a Month
○ Check the tire inflation pressures. See Tire Pressure on page 10‑51.
○ In ...
Skip channel selection
When in the SAT mode, press the following
button continuously (type A, B and C
audio)/briefly (type D audio) to change to
the channel selection mode.
Type A and B audio:
Type C audio:
Typ ...
Folding the exterior mirrors in or out electrically
This function is only available in vehicles for Canada.
Make sure that the SmartKey is in position 1 or 2 in the ignition lock.
Briefly press button 1. Both exterior mirrors fold in or out.
...
