Mercedes-Benz GLK-Class: Operation
Depending on the date of manufacture of your vehicle, the or symbol for the automatic headlamp mode/daytime running lamps is located on the light switch.
Illustration: light switch with the symbol for the automatic headlamp mode/daytime running lamps
Left-hand standing lamps
Right-hand standing lamps
Parking lamps, license plate and instrument cluster lighting
Automatic headlamp mode/daytime running lamps
Low-beam/high-beam headlamps
Rear fog lamp
Front fog lamps
Illustration: light switch with the symbol for the automatic headlamp mode/daytime running lamps
Left-hand standing lamps
Right-hand standing lamps
Parking lamps, license plate and instrument cluster lighting
Automatic headlamp mode/daytime running lamps
Low-beam/high-beam headlamps
Rear fog lamp
Front fog lamps
The turn signals, high-beam headlamps and the high-beam flasher are operated using the combination switch ().
Switch off the parking lamps and standing lamps when you leave the vehicle. This prevents the battery from discharging.
The exterior lighting (except the parking/ standing lamps) switches off automatically if you:
- remove the SmartKey from the ignition lock
- open the driver's door with the SmartKey in position 0
If you hear a warning tone when you leave the vehicle, the lights may still be switched on.
Turn the light switch to or .
Light switch
...Low-beam headlamps
To switch on the low-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. Turn the light switch to . The indicator lamp in the instrument cluster li ...See also:
Windows
Press the front of the switch to lower the window. Pull the switch up to raise
it.
Pushing or pulling the switch part of the way will open or close the window as
long as the switch is operated. ...
Filling the washer reservoir
The washer fluid reservoir supplies fluid to the
front and rear washer systems.
A good quality washer fluid should be used to fill
the washer reservoir. The fluid level should be
checked mor ...
Scan tuning (SCAN)
If you press the “SCAN” button briefly
(type A, B and C audio)/continuously (type
D audio), the radio will switch to the scan
mode. In this mode, the radio scans
through the radio band u ...