Volvo XC60: Messages
Park brake not fully released – A fault is preventing the parking brake from being released.
Try to apply the parking brake and release it several times. If the problem persists, contact an authorized Volvo workshop. If you drive off with this error message showing, a warning signal sounds.
Parking brake not applied – A fault is preventing the parking brake from being applied.
Try to apply the parking brake and release it several times. If the problem persists, contact an authorized Volvo workshop. If you drive off with this error message showing, a warning signal sounds.
Parking brake Service required – A fault has occurred. Try to apply and release. Contact a Volvo workshop if the fault remains.
WARNING
If the vehicle must be parked before the fault
has been corrected, always put the gear
selector in P and turn the wheels so that
they point away from the curb if the vehicle
is pointing uphill or toward the curb if it is
pointing downhill.
Symbols
...See also:
Vehicle Dynamics Control system monitor
Refer to “Vehicle Dynamics Control warning
light/Vehicle Dynamics Control operation
indicator light” and “Vehicle
Dynamics Control OFF indicator light”. ...
Required Maintenance Intervals
Refer to the Maintenance Schedules on the following
pages for the required maintenance intervals.
WARNING!
• You can be badly injured working on or around a
motor vehicl ...
Erasing HomeLink Buttons
To erase programming from the three Home-
Link buttons (individual buttons cannot be
erased but can be “reprogrammed” as outlined
below), follow the step noted:
1. Press and hold the two ou ...