Jeep Liberty: Manual Override
The Sky Slider™ drive motors are mounted to the roof above the cargo lamp. In the event that your vehicle losses battery power, you can close the Sky Slider™ by turning the drive gears in the appropriate motor with a 6 mm Allen wrench. To do so, you must first remove the cargo lamp from the headliner. Then, insert the wrench into the “Allen” shaped hole in the appropriate motor and turn the wrench clockwise until the top closes completely. The left motor facing forward will close the top when it is open from the rear of the vehicle. The right motor will close the top when it is open from the front of the vehicle.
Using Operator Mode
If the Sky Slider™ is open from the front, press the switch forward and hold it, the Sky Slider™ will move forward. Release the switch to stop the Sky Slider™ travel at any point. If the S ...Anti-Pinch Protect Feature
The Sky Slider™ will retract automatically if it detects an obstruction while closing. If this occurs, remove the obstruction and use the switch again to close the Sky Slider™. WARNING! T ...See also:
AdvanceTrac with Roll Stability Control™ (RSC Stability Enhancement System
The AdvanceTrac with RSC system provides the following stability
enhancement features for certain driving situations:
• Traction control (TCS), which functions to help avoid drive-wheel spin
an ...
Important safety notes
See the "Important safety notes" section ().
If ESP® detects that the vehicle is deviating from the direction desired by the
driver, one or more wheels are braked to stabilize the veh ...
Vehicle position error
Under certain conditions it is possible for the
vehicle position shown on screen to be
incorrect. This may happen when:
- Driving on a spiral ramp in a building.
- Driving on or beneath elevated r ...