GMC Terrain: Lower Anchor and Top Tether Anchor Locations - Lower Anchors and Tethers for Children (LATCH System) - Child Restraints - Seats and Restraints - GMC Terrain Owner's ManualGMC Terrain: Lower Anchor and Top Tether Anchor Locations

Rear Seat

Rear Seat

with top tether anchors.(Top Tether Anchor): Seating positions with top tether anchors.

with two lower anchors.(Lower Anchor): Seating positions with two lower anchors.

The rear outboard seating positions have exposed metal anchors located in the crease between the seatback and the seat cushion.

Top Tether Anchors

Top Tether Anchors

The top tether anchors for each rear seating position are located on the back of the rear seatback. The rear compartment storage panel/cover might need to be adjusted to access the anchors. Be sure to use an anchor located on the same side of the vehicle as the seating position where the child restraint will be placed.

Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached.

According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. See Where to Put the Restraint on page 3‑41 for additional information.

    Top Tether Anchor
    A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top ...

    Securing a Child Restraint Designed for the LATCH System
    WARNING If a LATCH-type child restraint is not attached to anchors, the child restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed ...

    See also:

    Loading all the magazine (full disc loading mode)
    1. If you continue to press the button for more than 1.5 seconds, the player will produce beep sound and will enter the full disc loading mode. 2. When the disc number indicator flashes and ...

    Trailer Towing
    Before pulling a trailer, there are three important considerations that have to do with weight: ○ The weight of the trailer ○ The weight of the trailer tongue ○ The total weight ...

    Sheet Metal Damage
    If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protecti ...