Range Rover Evoque: Label locations

Warning labels attached to your

Warning labels attached to your vehicle bearing this symbol mean: Do not touch or adjust components until you have read the relevant instructions in the handbook.

Labels showing this symbol indicate

Labels showing this symbol indicate that the ignition system utilises very high voltages. Do not touch any ignition components while the starter switch is turned on.

Additional information labels may also be found at the following locations:

1. Bonnet locking platform - Air conditioning

1. Bonnet locking platform - Air conditioning label.

2. Engine identification information. Stamped into engine mounting flange.

3. Engine information label. Top right side of engine cover.

4. Top of battery - Battery warning symbols.

5. The VIN (Vehicle Identification Number) is stamped on a plate which is visible through the lowest part of the left side of the windscreen.

Note: If you need to communicate with a Dealer/Authorised Repairer, you may be asked to quote the VIN number.

6. End of fascia (passenger side) - Passenger airbag label.

7. Sun visor - Airbag label, vehicle handling label.

8. Base of right-hand B pillar - Tyre pressure label, Airbag warning label - Vehicle Identification Number plate (China).

9. Left-hand B pillar - Airbag warning label, Vehicle Identification Number plate (except China).

10. Inside fuel filler flap - Fuel specification label.

It is important that you are familiar with these subjects to ensure that your vehicle and its features are used safely.

READ NEXT:

 Vehicle build date plate (Australia only)

This is the calendar month and year in which the body and power train assemblies were conjoined and the vehicle was driven from the production line. The vehicle built date is shown on the tyre pr

 Land Rover Range Rover Evoque L538 (2011–2018) Service Manual

Service Manual for first generation (L538) Range Rover Evoque. Land Rover engineers have developed the Range Rover Evoque to provide customers with a polished driving experience that combines dynamic

SEE MORE:

 Lifting

Two-Post Lift WARNING: Make sure that the vehicle is stable before commencing work. CAUTION: If the drive shaft(s) are to be removed, release the parking brake and select NEUTRAL 'N' in the transmission in order that the shaft(s) can be rotated when the vehicle is raised to the desired height.

 Body Repairs - General Information

General Information Introduction The body plays a significant role in the increasing trend of ever more rapidly changing model variants. The different customer groups are strongly influenced by the design and shape of the body. At the same time the stability of the body plays the most important pa

© 2011-2024 Copyright www.rrevoque.org