Range Rover Evoque: Keyless entry

Keyless entry allows the vehicle to be opened if a Smart Key is within 1.0m (3ft) of the door handle or the tailgate external switch.

is placed within a metal container or if it The Smart Key may not be detected if it is placed within a metal container or if it is shielded by a device with a back-lit LCD screen, such as a smart phone, laptop (including laptop bag), games console etc. Keep the Smart Key clear of such devices when attempting Keyless entry or Keyless starting.

Note: The Smart Key needs only to be on the driver’s person or in a non-metallic bag or briefcase. It does not need to be exposed or handled.

When keyless entry operates, the alarm will be disarmed and the doors unlocked according to the current unlock/entry setting (Single or Multi-Point). The hazard warning lamps will flash twice as ‘unlock’ confirmation. Power folded mirrors will fold out (if enabled).

Note: If Single Point Entry is the current security setting and a door other than the driver’s door is opened first, all doors will unlock.

READ NEXT:

 Smart key check

If the ignition is on or the engine is running and there is no Smart Key inside the vehicle when the last door is closed, the message Smart Key Not Found Refer to Handbook will be displayed in the

 Disarming if the smart key and keyless entry fail to work

The vehicle can still be unlocked and the alarm disabled. To unlock the vehicle: 1. Unlock the left side front door using the key blade. The alarm will be triggered. 2. Position the Smart Key agai

 Deactivating the alarm when triggered

If the alarm has been triggered, it can be deactivated by any one of the following methods: - Pressing the unlock button on the Smart Key. - Opening a door using keyless entry. - Positioning a v

SEE MORE:

 A-Pillar Reinforcement

Removal NOTES: The A- Pillar reinforcement is manufactured from DP600, it is serviced with its upper and lower door hinge mounting brackets. The A-Pillar reinforcement is unpicked from the side panel reinforcement 'ring-frame', it is not serviced separately. If the A-pillar reinforcement is dama

 Terrain response operation

Terrain Response selection is via one of two centre console switches. Depending on vehicle specification, the control switches may include a Dynamic program setting. Use the switches to move through up to five program selections. The currently selected program icon will be displayed in the mes

© 2011-2024 Copyright www.rrevoque.org