Jeep Liberty: Key Ignition Park Interlock - Automatic Transmission - Starting And Operating - Jeep Liberty Owner's ManualJeep Liberty: Key Ignition Park Interlock

This vehicle is equipped with a Key Ignition Park Interlock which requires the shift lever to be placed in PARK before the ignition switch can be turned to the LOCK/ OFF position. The key can only be removed from the ignition when the ignition is in the LOCK/OFF position.

Once the key is removed, the shift lever is locked in PARK.

    Automatic Transmission
    CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of RE ...

    Brake/Transmission Shift Interlock System
    This vehicle is equipped with a Brake Transmission Shift Interlock (BTSI) that holds the shift lever in the PARK position unless the brakes are applied. To move the shift lever out of the PARK p ...

    See also:

    Side ventilators
    Side ventilators 1) Open 2) Close 3) Thumb-wheel Move the tab to adjust the flow direction. To open or close the ventilator, turn the thumb-wheel up or down. ...

    Seat belt pretensioners
    All seat belts are equipped with pretensioners that reduce slack in the belts. These pretensioners are triggered in situations where the front or side impact airbags deploy, and in certain imp ...

    Jump-starting
    WARNING Failure to follow these directions will cause damage to the electronic components, and can lead to a battery explosion and severe injury or death. Never lean over batteries while connectin ...