Cleaning the trailer tow hitch

The ball coupling must be cleaned if it becomes dirty or corroded. Remove rust on the ball of the ball coupling, e.g. with a wire brush. Remove dirt with a clean, lint-free cloth or a brush. A ...

Cleaning the display

Before cleaning the display, make sure that it is switched off and has cooled down. Clean the display surface using a commercially-available microfiber cloth and TFT/LCD display cleaner. ...

See also:

Terrain response messages
Messages relating to the Terrain response system are displayed in the message centre. See 56, INSTRUMENT PANEL. Most of the messages that appear will be for information only and require no driver ...

Audio main operation
Head unit: The auto loudness circuit enhances the low and high frequency ranges automatically in both radio reception and CD playback. PWR/Volume control: Place the ignition switch in the ACC o ...

Radio FM
To switch to the FM band, say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency #” (to change the frequency) • “Next Station” (to select the ...