Mercedes-Benz GLK-Class: Instrument cluster - Settings menu - Menus and submenus - On-board computer and displays - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Instrument cluster

Selecting the unit of measurement for distance

The Display Unit Speed-/Odometer: function allows you to choose whether certain displays appear in kilometers or miles.

The selected unit of measurement for distance applies to:

  • the digital speedometer in the Trip menu
  • the odometer and the trip odometer
  • the trip computer
  • the current consumption and the range
  • the navigation instruction in the Navi menu
  • ASSYST PLUS service interval display

 

  • Press the button on the steering wheel to or select the Settings menu. button on the steering wheel to select the Settings menu.
  • Press the   button to select the Instr. or cluster submenu.  button to select the Instr. cluster submenu.
  • Press the Press the or button to confirm.
  • Press the button to select the Display Unit or Speed-/Odometer function. You will see the selected setting: km or miles. button to select the Display Unit Speed-/Odometer function. You will see the selected setting: km or miles.
  • Press the the setting. button to save the setting.

Selecting the permanent display function

The Permanent Display: function allows you to choose whether the multifunction display always shows the outside temperature or the speed in km/h (USA) or mph (Canada).

  • Press the button on the steering wheel to or select the Settings menu. button on the steering wheel to select the Settings menu.
  • Press the button to select the Instr. cluster or submenu. button to select the Instr. cluster submenu.
  • Press the Press the or button to confirm.
  • Press the button to select the Permanent or display function. You will see the selected setting Outside Temperature or Speedometer button to select the Permanent display function. You will see the selected setting Outside Temperature or Speedometer [km/h]:.
  • Press the the setting. button to save the setting.
    Introduction
    The Settings menu can be used for: changing the instrument cluster settings changing the time/date settings changing the light settings changing the vehicle settings changing the conveni ...

    Time/date
    This submenu is only available on vehicles with Audio 20. To set the time and the date for vehicles with COMAND, see the separate operating instructions. In the Time/date submenu, you can set the t ...

    See also:

    Fuel filler flap
    Take note of all warnings and instructions given on the label affixed to the inside of the filler flap. The fuel filler flap is located on the right-hand side of the vehicle, at the rear. 1. I ...

    Power Liftgate Operation
    On vehicles with a power liftgate, the vehicle must be in P (Park) to use the power feature. The taillamps flash when the power liftgate moves. Notice: If you open the liftgate without checking f ...

    Closing
    WARNING Monitor the closing procedure carefully to make sure no one is in danger of being injured. To prevent possible personal injury, always keep hands and fingers away from the cargo comp ...