Nissan Rogue: Installing top tether strap
Installing top tether strap
First secure the child restraint with the LATCH system (rear outboard seating positions only) or the seat belt as applicable.
1. Remove the anchor cover from the anchor point which is located directly behind the child seat.
2. Position the top tether strap over the top of the seatback.
3. Secure the tether strap to the tether anchor bracket that provides the straightest installation.
4. Tighten the tether strap according to the manufacturer’s instructions to remove any slack.
If you have any questions when installing a top tether strap, consult your NISSAN dealer for details.
Forward-facing child restraint installation using the seat belts
- The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not bein ...Booster seats
Precautions on booster seats If a booster seat and seat belt are not used properly, the risk of a child being injured in a sudden stop or collision greatly increases: - Make sure the shou ...See also:
Releasing the parking lock manually
In the event of an electrical malfunction, it is possible to release the selector
lever lock manually to move it out of position P, e.g. if you wish to tow the vehicle
away.
Do not use any s ...
Before Driving
The RSE is for rear seat passengers only. The driver cannot safely view the video
screen while driving.
In severe or extreme weather conditions, the RSE system may not work until the
temperature ...
Occupant safety reminders
How safely you drive doesn't depend on how
old you are but rather on:
• How well you see.
• Your ability to concentrate.
• How quickly you make decisions under
stress to avoid an accident ...