Toyota RAV4: Installation with LATCH system (second outside seats only) - Safety information - Before driving - Toyota RAV4 Owner's ManualToyota RAV4: Installation with LATCH system (second outside seats only)

Fold the seatback while pulling

Fold the seatback while pulling the lever. Return the seatback and secure it at the 1st lock position (most upright position). Adjust the seatback to the 7th lock position.

1st lock position
7th lock position

Type A

Latch the hooks of the lower

Latch the hooks of the lower straps onto the LATCH anchors. The bars are installed in the clearance between the seat cushion and seatback. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada:

The symbol on a child restraint system indicates the presence of a lower connector system.

Type B

Latch the buckles onto the

Latch the buckles onto the LATCH anchors. The bars are installed in the clearance between the seat cushion and seatback. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada:

The symbol on a child restraint system indicates the presence of a lower connector system.

    Installing child restraints
    Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the outside rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when insta ...

    Installing child restraints using a seat belt (child restraint lock function belt)
    ■ Rear facing - Infant seat/convertible seat Place the child seat on the rear seat facing the rear of the vehicle. Run the seat belt through the child seat and insert the plate into the ...

    See also:

    Important information
    The cooling with air dehumidification function is only available when the engine is running. The air inside the vehicle is cooled and dehumidified according to the temperature selected. WARN ...

    Catalytic converter
    Turbo models Non-turbo models The catalytic converter is installed in the exhaust system. It serves as a catalyst to reduce HC, CO and NOx in exhaust gases, thus providing cleaner exha ...

    Turbo models
    Turbo models 1) Power steering oil pump pulley 2) Front side belt 3) Alternator pulley 4) Air conditioner compressor pulley 5) Rear side belt 6) Crank pulley A) 22 lbf (98 N, 10 kgf) ...