Subaru Forester: Initialization of power window (type A)
If the vehicle’s battery is disconnected due to situations such as battery or fuse replacement, the following functions are deactivated.
- One-touch auto up/down function
- Anti-entrapment function
Initialize the power window using the following procedure to reactivate these functions.
1. Close the driver’s door.
2. Turn the ignition switch to the “ON” position.
3. Open the driver’s side window halfway by pushing down the power window switch.
4. Pull up the power window switch and close the window completely. Continue pulling up the switch for approximately 1 second after the window is closed completely.
Power window operation by passengers
Each passenger window can be controlled by the power window switch located on the door. To open: Push the switch down and hold it until the window reaches the desired position. To close: P ...Rear gate
The rear gate can be locked and unlocked using any of the following systems. - Power door locking switch: Refer to “Power door locking switches”. - Remote keyless entry system: Refer to ...See also:
ABS warning light
Refer to “ABS warning light”. ...
Tire and Loading Information label
1 Seating capacity: The maximum number
of occupants that can be seated in the
vehicle.
2 Vehicle load limit: See “Vehicle loading
information” in the “9. Technical and
consumer inform ...
If the Vehicle Is Stuck
Slowly and cautiously spin the wheels to free the vehicle when stuck in sand,
mud, ice, or snow.
If stuck too severely for the traction system to free the vehicle, turn the traction
system off an ...