Subaru Forester: Information display
Information display
1) Outside temperature indicator
2) Fuel consumption indicator
With the ignition switch in the “ON” position, the outside temperature and fuel consumption are indicated on the display.
For type A combination meter:
1) Information display switching knob
With the ignition switch in the “ON” position, each successive press of the information display switching knob toggles the display in the following sequence.
For type B combination meter:
The fuel consumption indicator is linked with the odometer/trip meter display on the combination meter, according to the following chart.
- Outside temperature indicator
- Current fuel consumption (if equipped)
- Average fuel consumption
- To turn off fuel consumption indicator display
Clock
Clock The clock shows the time while the ignition switch is in the “Acc” or “ON” position. The time changes by 1 minute each time the “+” button or “−” button is pres ...Outside temperature indicator
Outside temperature indicator 1) U.S.-spec. models 2) Except U.S.-spec. models The outside temperature indicator shows the outside temperature in a range from −22 to 1228F (−30 ...See also:
Vehicle load limit
Tire and Loading Information Label
Type A
Type B
Type C
The tire label located on the driver's
side of the center pillar outer panel
gives the original tire size, cold tire
pressure ...
Service Contract
You may have purchased a service contract for a vehicle
to help protect you from the high cost of unexpected
repairs after the manufacturer’s New Vehicle Limited
Warranty expires. The manufact ...
Electronic Speed Control – If Equipped
− Do not use in hilly terrain or with heavy loads.
− When using the speed control, if you experience speed
drops greater than 10 mph (16 km/h), disengage until
you can get back to cru ...