Mercedes-Benz GLK-Class: Inflating the collapsible spare wheel - Changing a wheel and mounting the spare wheel - Flat tire - Breakdown assistance - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Inflating the collapsible spare wheel

WARNING WARNING

Inflate the collapsible spare wheel only after the wheel is properly attached. Inflate the collapsible spare wheel using the tire inflation compressor before lowering the vehicle.

  • Pull connector 4 and the air hose out of the housing.
  • Remove the cap from the valve on the collapsible spare wheel.
  • Screw union nut 1 on the air hose onto the valve.
  • Make sure on/off switch 5 of the tire inflation compressor is set to 0.
  • Insert plug 4 into the socket of the cigarette lighter () or into a 12 V power socket () in your vehicle.
  • Make sure that the SmartKey is in position 1 () in the ignition lock.
  • Press on/off switch 5 on the tire inflation compressor to I. The tire inflation compressor is switched on. The tire is inflated. Gauge 3 shows the tire pressure.

at a time without a break. It may otherwise overheat. Do not operate the tire inflation compressor for longer than eight minutes at a time without a break. It may otherwise overheat.

The tire inflation compressor can be operated again once it has cooled down.

  • Inflate the tire to the specified tire pressure. The specified tire pressure is printed on the yellow label of the emergency spare wheel.
  • When the specified tire pressure has been reached, press on/off switch 5 on the electric air pump to 0. The tire inflation compressor is switched off.
  • Turn the SmartKey to position 0 in the ignition lock.
  • If the tire pressure is higher than the specified pressure, press pressure release button 2 until the correct tire pressure has been reached.
  • Unscrew union nut 1 on the air hose from the valve.
  • Screw the valve cap onto the collapsible spare wheel valve again.
  • Stow plug 4 and the air hose in the lower section of the compressor housing.
  • Stow the tire inflation compressor in the designated place in the vehicle.
    Mounting a new wheel
    WARNING Always replace wheel bolts that are damaged or rusted. Never apply oil or grease to wheel bolts. Damaged wheel hub threads should be repaired immediately. Do not continue to drive und ...

    Lowering the vehicle
    WARNING Pump up the collapsible spare wheel before lowering the vehicle. You could otherwise damage the wheel rim. Place the ratchet wrench onto the hexagon nut of the jack so that the ...

    See also:

    Introduction
    Information display and controls 1 READ–press to acknowledge/confirm/erase a message) 2 Thumb wheel (used to scroll among the trip computer menus) 3 RESET–resets certain functions To scroll ...

    Vehicle capacity weight
    Vehicle capacity weight The load capacity of your vehicle is determined by weight, not by available cargo space. The maximum load you can carry in your vehicle is shown on the vehicle ...

    Child restraint and safety belt maintenance
    Inspect the vehicle safety belts and child safety seat systems periodically to make sure they work properly and are not damaged. Inspect the vehicle and child seat safety belts to make sure there ar ...