Volvo XC60: Ignition mode I - Ignition modes - Ignition modes - Your driving environment - Volvo XC60 Owner's ManualVolvo XC60: Ignition mode I

NOTE
To access ignition modes I or II without starting the engine, the brake pedal must not be depressed.

- With the remote key fully pressed into the ignition slot, press START/STOP ENGINE briefly.

    Ignition mode 0
    - Insert the remote key in the ignition slot and press it in as far as possible. ...

    Ignition mode II
    - With the remote key fully pressed into the ignition slot, press START/STOP ENGINE for approximately 2 seconds. ...

    See also:

    If No Steam is Coming from the Engine Compartment
    If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: ○ Climbs a ...

    Multi-information display
    The following information is included on the multi-information display: warnings, odometer/tripmeter, service reminders, engine coolant temperature, fuel remaining, outside temperature, 4WD operat ...

    Active Head Restraints — Front Seats
    Active Head Restraints are passive, deployable components, and vehicles with this equipment cannot be readily identified by any markings, only through visual inspection of the head restraint. Th ...