GMC Terrain: How to Reset the Engine Oil Life System - Engine Oil Life System - Vehicle Checks - Vehicle Care - GMC Terrain Owner's ManualGMC Terrain: How to Reset the Engine Oil Life System

Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. To reset the system:

1. Turn the ignition to ON/RUN, with the engine off.
2. Press the DIC MENU button to display the Vehicle Information menu.
3. Press either the up or down arrows to view REMAINING OIL LIFE.
4. Press the SET/CLR button until 100% is displayed.
5. Turn the key to LOCK/OFF.

Or:

1. Turn the ignition to ON/RUN with the engine off.
2. Fully press and release the accelerator pedal three times within five seconds.

The system is reset when the CHANGE ENGINE OIL SOON message goes off.

If the CHANGE ENGINE OIL SOON message comes back on when the vehicle is started, the engine oil life system has not been reset. Repeat the procedure.

    When to Change Engine Oil
    This vehicle has a computer system that indicates when to change the engine oil and filter. This is based on a combination of factors which include engine revolutions, engine temperature, and mile ...

    See also:

    Turning ACC off completely
    • From standby mode, press once. • From active mode, press twice. The set speed and time interval are then cleared from the system's memory and cannot be resumed by pressing . ...

    Hazard warning flasher switch
    Hazard warning flasher switch Push the switch on to warn other drivers when you must stop or park under emergency conditions. All turn signal lights will flash. - If stopping for an emergen ...

    Disconnecting the cell phone
    The cell phone is automatically disconnected from the infotainment system if it is moved out of range. The cell phone can be manually disconnected from the hands-free system by pressing and h ...