Toyota RAV4: Hood
Release the lock from the inside of the vehicle to open the hood.
Pull the hood release lever. The hood will pop up slightly.
Lift the auxiliary catch lever and lift the hood.
Hold the hood open by inserting the supporting rod into the slot.
CAUTION
■Pre-driving check
Check that the hood is fully closed and locked.
If the hood is not locked properly, it may open while the vehicle is in motion
and cause an accident, which may result in death or serious injury.
■After installing the support rod into the slot
Make sure the rod supports the hood securely from falling down on to your
head or body.
NOTICE
■When closing the hood
Be sure to return the support rod to its clip before closing the hood. Closing
the hood with the support rod up could cause the hood to bend.
Do-it-yourself service precautions
If you perform maintenance yourself, be sure to follow the correct procedures as given in these sections. CAUTION The engine compartment contains many mechanisms and fluids that may move sudde ...Positioning a floor jack
When raising your vehicle with a floor jack, position the jack correctly. Improper placement may damage your vehicle or cause injury. ■ Front ■ Rear CAUTION ■When raising yo ...See also:
Warning/indicator lights and audible reminders
All-Wheel Drive (AWD) warning light (AWD
models)*
Anti-lock Braking System (ABS) warning
light
Brake warning light
Charge warning light
Electric power steering warning light
Engin ...
Maximum gradient-climbing capability
If the load on the front axle is reduced when pulling away on a steep uphill
slope, the front wheels have a tendency to spin. 4ETS recognizes this and brakes
the wheels accordingly. The rear wh ...
Sensor care
When washing the vehicle do
not aim
high pressure water jets directly at the
sensors. Do not use abrasive materials
or hard/sharp objects to clean the
sensors. Only use approved vehicle
shampo ...