Nissan Rogue: Headlight beam select - Headlight switch - Headlight and turn signal switch - Instruments and controls - Nissan Rogue Owner's ManualNissan Rogue: Headlight beam select

Headlight beam select
Headlight beam select

1 To select the low beam, put the lever in the neutral position as shown.

2 To select the high beam, push the lever forward while the switch is in the to select the low beam. position. Pull it back to select the low beam.

3 Pulling the lever toward you will flash the headlight high beam even when the headlight switch is in the OFF position.

    Lighting
    1 Turn the switch to the position: The front park, side marker, tail, license plate and instrument lights will come on. 2 Turn the switch to the position: Headlights will come on and all the ...

    Battery saver system
    - When the headlight switch is in the or position while the ignition switch is in the ON position, the lights will automatically turn off 5 minutes after the ignition switch has been turned ...

    See also:

    Engine cooling system
    The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and cool ...

    Cargo Load Floor
    The cargo load floor system has a load capacity of 400 lbs (181 kg). The load floor has a built-in storage bin that can hold a variety of items. The underside of the storage bin cover also conta ...

    Seat belts
    SEAT BELT PRECAUTIONS WARNING: All occupants of the vehicle must wear their seat belts at all times. Seat belts and child restraints reduce the risk of serious or fatal injuries for all occup ...