Suzuki Grand Vitara: Head Restraints
Head Restraints
Head restraints are designed to help reduce the risk of neck injuries in case of an accident. Adjust the head restraint to the position which places the center of the head restraint closest to the top of your ears. If this is not possible for very tall passengers, adjust the head restraint as high as possible.
WARNING:
• Never drive the vehicle with the head restraints removed.
• Do not attempt to adjust the head restraint while driving.
Front
To raise the head restraint, pull upward on the restraint until it clicks. To lower the restraint, push down on the restraint while holding in the release knob (1). If a head restraint must be removed (for cleaning, replacement, etc.), use the following procedure.
1) Insert a sharp-pointed tool into the small hole (2). Push the tip into the hole (2) and hold it while pushing in the release knob (1). 2) Pull the head restraint all the way out while pushing the release knob (1) and holding the tip in the hole (2).
NOTE: It may be necessary to recline the seatback to provide enough overhead clearance to remove the head restraint.
To reinstall the head restraint, insert the head restraint bars into the holes (2) and push the head restraint down.
Rear
To raise the rear head restraint, pull upward on the restraint until it clicks. To lower the restraint, push down on the restraint while holding in the release knob. If a head restraint must be removed (for cleaning, replacement, etc.), push in the release knob and pull the head restraint all the way out. When installing a child restraint system, raise the head restraint to the most upper position.
Seat Adjustment
WARNING: Never attempt to adjust the driver’s seat or seatback while driving. The seat or seatback could move unexpectedly, causing loss of control. Make sure that the driver’s seat and seatb ...Seat Belts and Child Restraint Systems
WARNING: An air bag supplements, or adds to, the frontal crash protection offered by seat belts. The driver and all passengers must be properly restrained by wearing seat belts at all times, wh ...See also:
Airflow mode selection button
Airflow mode selection button
Select the desired airflow mode by pressing
the airflow mode selection button. The
selected airflow mode is indicated on the
display.
Each airflow mode activate ...
Important information
WARNING
When the climate control system is deactivated, the outside air supply and circulation
are also deactivated. Only choose this setting for a short time. Otherwise the windows
could fo ...
High beam indicator light
This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated. ...