Mitsubishi Outlander: Hazard warning flasher switch - Instruments and controls - Mitsubishi Outlander Owner's ManualMitsubishi Outlander: Hazard warning flasher switch

Use the hazard warning flasher switch when the vehicle has to be parked on the

Use the hazard warning flasher switch when the vehicle has to be parked on the road for any emergency. The hazard warning flashers can always be operated, regardless of the position of the ignition switch. Push the switch to turn on the hazard warning flashers, all turn signal lamps flash continuously. To turn them off, push the switch again.

    Turn-signal lever
    1- Turn-signals. When making a normal turn, use position (1). The lever will return automatically when cornering is completed. 2- Lane-change signals. When moving the lever to (2) slightly to ch ...

    Fog lamp switch
    Front fog lamp switch* The front fog lamps can be operated while the headlamps and tail lamps are on. Turn the knob in the “ON” direction to turn on the front fog lamps. An indicator lamp i ...

    See also:

    XM Categories
    XM stations are organized in categories. To customize which XM categories are used and displayed in the system, see “Adding or Removing XM Categories” following. ...

    Limitations
    Strong sunlight, reflections, extreme light contrasts, the use of sunglasses, or if the driver is not looking straight ahead may make the visual warning signal in the windshield difficult to see ...

    Blower control
    Turn the control clockwise to increase or counterclockwise to decrease the blower speed. If AUTO is selected, blower speed will be regulated automatically and this will override manual a ...