Volvo XC60: Function - City Safety - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Function

Location of the laser sensor in the windshield
Location of the laser sensor in the windshield

City Safetyâ„¢ monitors traffic ahead of you using a laser sensor mounted in the upper section of the windshield. If a collision is imminent, City Safetyâ„¢ will automatically apply the brakes, which may feel like hard braking.

If the difference in speed between your vehicle and the vehicle ahead is more than approximately 9 mph (15 km/h), City Safetyâ„¢ alone cannot prevent a collision from taking place.

The driver must apply the brakes to help avoid a collision or reduce its effect.

When the function activates and applies the brakes, a message will appear in the information display to indicate that the system is/has been active.

NOTE
• When City Safety™ applies the brakes, the brake lights will illuminate.
• In cases where City Safety™ has stopped the vehicle, the system will then release the brakes. The driver must apply the brakes to keep the vehicle at a standstill.

    Introduction
    City Safety™1 is a support system designed to help the driver avoid low speed collisions when driving in slow-moving, stop-and-go traffic. City Safety™ is not active if your vehicle’s spe ...

    Using City Safety
    NOTE The City Safetyâ„¢ function is activated automatically each time the engine has been switched off and restarted. On and Off In certain situations, it may be desirable to switch City Safe ...

    See also:

    Emissions Controls
    The burning of gasoline in your vehicle’s engine produces several byproducts. Some of these are carbon monoxide (CO), oxides of nitrogen (NOx), and hydrocarbons (HC). Gasoline evaporating fr ...

    Indicator and warning symbols
    Low oil pressure If the light comes on while driving, stop the vehicle, stop the engine immediately, and check the engine oil level. If the oil level is normal and the light stays on after ...

    XM Radio Display Messages
    ‘‘LOADING’’ - XM is loading the audio or program information. ‘‘OFF AIR’’ - The channel currently selected is no longer broadcasting. ‘‘UPDATING’’ - The encryptio ...