GMC Terrain: Front Wiper Blade Replacement
To replace the front wiper blades:
1. Lift the wiper arm from the windshield until no further movement is possible.
2. Press the square button on the top side, at the end of the wiper arm, and pull the wiper blade out of the end of the wiper arm.
3. Install the wiper blade connector by sliding into the end of the wiper arm until the square button on the wiper blade clicks into place with the wiper arm.
4. Place the wiper arm with the wiper blade in place back on the windshield.
Wiper Blade Replacement
Windshield wiper blades should be inspected for wear and cracking. See Maintenance
Schedule on page 11‑3 for more information.
Replacement blades come in different types and are removed in di ...
Rear Wiper Blade Replacement
The rear wiper blade and wiper arm have a cover for protection. The cover must
be removed before the wiper blade can be replaced. To remove the cover:
1. Slide a plastic tool under the cover and ...
See also:
Radio AM
To switch to the AM band, say “AM” or “Radio AM”. In
this mode, you may say the following commands:
• “Frequency #” (to change the frequency)
• “Next Station” (to select the ...
Securing the load
There are tie down hooks located in the cargo
area as shown. The tie down hooks can be used
to secure cargo with ropes or other types of
straps.
Do not apply a total load of more than 22
lb ...
Playing a Disc (EX-L model with navigation system)
Playing a Disc (EX-L model with navigation system) ...
