Toyota RAV4: Four-wheel drive lock switch (4WD models)
Four-wheel drive lock mode can be used when a large amount of drive power needs to be applied to all the wheels, such as when the vehicle gets stuck in mud and you need to free it.
Press the switch. The torque of the engine is distributed to the rear wheels to the maximum extent possible in accordance with driving conditions. Pressing the switch again cancels four-wheel drive lock mode and returns the Active Torque Control 4WD system to normal mode.
■Four-wheel drive lock mode can be operated when
Vehicles without smart key system
The engine switch is in the “ON” position
Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
Four-wheel drive lock mode
●Four-wheel drive lock mode is canceled when the brakes are applied to
ensure the ABS and VSC systems operate effectively.
●Four-wheel drive lock mode is canceled when the vehicle speed exceeds
25 mph (40 km/h).
While the downhill assist control system is operating
The slip indicator will flash to indicate that the downhill assist control system is operating, and the stop lights and high mounted stoplight will turn on. ■Conditions in which the downh ...See also:
Hitches
Use the correct hitch equipment. See your dealer or a hitch dealer for assistance.
○ The rear bumper on the vehicle is not intended for hitches. Do not attach rental
hitches or other bumper-t ...
Maintenance Schedule
The following table shows the times when you should perform regular maintenance
on your vehicle. This table shows in miles, kilometers and months when you should
perform inspections, adjustments, ...
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
1 Vehicles without smart key system: Turn the engine switch
off ...