Mercedes-Benz GLK-Class: Engine oil viscosity
Viscosity describes the flow characteristics of a fluid. If an engine oil has a high viscosity, this means that it is thick; a low viscosity means that it is thin.
Select an engine oil with an SAE (viscosity) classification suitable for the prevailing outside temperatures. The following table shows the correct SAE classification to be used. The low-temperature characteristics of engine oils can deteriorate significantly, e.g. as a result of aging, soot and fuel deposits. It is therefore strongly recommended that you carry out regular oil changes using an approved engine oil with the appropriate SAE classification.
Please bear the following in mind
The engine oils are matched to the performance of Mercedes-Benz
engines and service intervals. You should therefore only use engine oils and oil
filters that are approved for vehicles with mainten ...
Refrigerant of the air-conditioning system
The air-conditioning system is filled with R134a refrigerant and a special PAG
lubricant.
Never use refrigerant R 12 (CFC) or mineral lubricants. Otherwise, you could
damage the air-conditioni ...
See also:
Full screen view controls
When full screen mode is selected, the seek
controls operate in the same manner as they do
in preview mode.
Display format: Use the relevant soft key to
select the 4:3, 16:9 or Zoom option.
Digit ...
Display Fuel Saver — If Equipped
The “ECO” message is located in the Compass/
Temperature display; this message can be turned on or
off. To make your selection, press and release the SELECT
button until “ON” or “OFF ...
Tire Identification Number (TIN)
The TIN may be found on one or both sides of the tire,
however, the date code may only be on one side. Tires
with white sidewalls will have the full TIN, including the
date code, located on the ...
