Jeep Liberty: Engine Coolant Level
The coolant bottle provides a quick visual method for determining that the coolant level is adequate. With the engine idling, and warm to normal operating temperature, the level of the engine coolant (antifreeze) in the bottle should be between the ranges indicated on the bottle.
The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for coolant freeze point or replacing engine coolant (antifreeze).
Advise your service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month.
When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill.
Disposal Of Used Engine Coolant
Used ethylene glycol based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. T ...Points To Remember
NOTE: When the vehicle is stopped after a few miles/ kilometers of operation, you may observe vapor coming from the front of the engine compartment. This is normally a result of moisture from ra ...See also:
Bluetooth Controls
Use the buttons located on the infotainment system and the steering wheel to
operate the Bluetooth system.
Steering Wheel Controls
(Push To Talk): Press to answer
incoming calls, confirm system ...
Exterior mirror out of position
If an exterior mirror has been pushed out of position, proceed as follows:
Vehicles without electrically folding exterior mirrors: move the exterior
mirror into the correct position manually.
...
Displaying service messages
Switch on the ignition.
Press or
on the steering wheel to select
the Serv. menu.
Press or
to select the ASSYST PLUS submenu
and press to confirm. The service
due date appears ...