Jeep Liberty: Engine Block Heater — If Equipped - Starting And Operating - Jeep Liberty Owner's ManualJeep Liberty: Engine Block Heater — If Equipped

The engine block heater warms the engine, and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded three-wire extension cord.

The engine block heater cord is found under the hood clipped to the heater line on the left side of the engine.

The engine block heater must be plugged in at least one hour to have an adequate warming effect on the engine.

WARNING!
Remember to disconnect the engine block heater cord before driving. Damage to the 110-115 Volt AC electrical cord could cause electrocution.

    After Starting
    The idle speed will automatically decrease as the engine warms up. ...

    Automatic Transmission
    CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of RE ...

    See also:

    Cigarette Lighter and Ashtray
    Cigarette Lighter (if equipped) To use the cigarette lighter, push it all the way into the receptacle and release it. It will automatically heat up and will pop out to its normal position when i ...

    Air Conditioning System
    If you do not use the air conditioner for a long period, such as during winter, it may not give the best performance when you start using it again. To help maintain optimum performance and durabil ...

    Automatic Climate Control System
    The vehicle's heating, cooling, defrosting, and ventilation can be controlled with this system. A. Fan Control B. AUTO (Automatic Operation) C. Air Delivery Mode Controls D. Front Defrost ...