GMC Terrain: Electronic Range Select (ERS) Mode - Automatic Transmission - Driving and Operating - GMC Terrain Owner's ManualGMC Terrain: Electronic Range Select (ERS) Mode

ERS or manual mode allows for the selection of the range of gear positions. Use this mode when driving downhill or towing a trailer to limit the top gear and vehicle speed. The shift position indicator within the Driver Information Center (DIC) will display a number next to the M indicating the highest available gear under manual mode and the driving conditions when manual mode was selected.

To use this feature:

1. Move the shift lever to M(Manual Mode).
2. Press the plus/minus button on the shift lever, to increase or decrease the gear range available.

When shifting to M(Manual Mode), the transmission will shift to a preset lower gear range. For this preset range, the highest gear available is displayed next to the M in the DIC. See Driver Information Center (DIC) on page 5‑23 for more information. All gears below that number are available to use. For example, when 4 (Fourth) is shown next to the M, 1 (First) through 4 (Fourth) gears are shifted automatically. To shift to 5 (Fifth) gear, press the + (Plus) button or shift into D (Drive).

M(Manual Mode) will prevent shifting to a lower gear range if the engine speed is too high. If vehicle speed is not reduced within the time allowed, the lower gear range shift will not be completed. Slow the vehicle, then press the − (Minus) button to the desired lower gear range.

While using the ERS, cruise control can be used.

    Fuel Economy Mode
    Vehicles with a 2.4L engine have a Fuel Economy Mode. When engaged, fuel economy mode can improve the vehicle's fuel economy Press the “eco” (economy) button by the shift lever to turn th ...

    See also:

    Intelligent Key system (if so equipped)
    Intelligent Key system (if so equipped) The Intelligent Key system can operate the ignition switch without taking the key out from your pocket or purse. The operating environment and/or con ...

    Before You Begin Programming HomeLink
    Be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmission of the radio-frequency signal it is recommended th ...

    Locking the vehicle
    Models with keyless drive have a button on the outside door handles The doors and the tailgate can be locked by pressing the lock button in any of the outside door handles. NOTE On keyless d ...