Range Rover Evoque: Driver override options

Although Dynamic Stability Control is automatically engaged when a special program is selected, it can be turned off if required. See 91, DISABLING DSC.

Hill Descent Control (HDC) will be automatically engaged for some terrain response programs. If required it can be deselected or engaged independently of Terrain response. See 96, HILL DESCENT CONTROL (HDC) CONTROLS.

The HDC status will be displayed on the message centre whether it is engaged, or disengaged, by the system or by the driver.

READ NEXT:

 System difficulties

Use of an incorrect program will impair the vehicle's response to the terrain and can reduce the life of the suspension and drive systems. If the system becomes partially inoperable for any re

 Terrain response messages

Messages relating to the Terrain response system are displayed in the message centre. See 56, INSTRUMENT PANEL. Most of the messages that appear will be for information only and require no driver

 Hill descent control

SEE MORE:

 Transmission Control Module (TCM) TD4 2.2L Diesel

Removal 1. Disconnect the battery ground cable. Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications). 2. Refer to: Air Cleaner (303-12, Removal and Installation). 3. 4. 5. CAUTION: Discard the component. 6. 7. Installation 1. Torque: 25 Nm 2. 3. Torque: M10 47 Nm

 Programmed position loss

The powered tailgate may lose its position memory if there are multiple object detections or if battery voltage is low. Powered operation may be inhibited. To reset the tailgate; 1. Manually close the tailgate. 2. Press a release switch. 3. Allow the tailgate to power fully open or to the pre

© 2011-2024 Copyright www.rrevoque.org