Ford Escape: Determining if the system is operational - Safety Canopy System - Airbag Supplemental Restraint System (SRS) - Seating and Safety Restraints - Ford Escape Owner's ManualFord Escape: Determining if the system is operational

The SRS uses a readiness light in the instrument cluster or a tone to indicate the condition of the system. Refer to Warning lights and chimes in the Instrument Cluster chapter. Routine maintenance of the side airbag is not required.

A difficulty with the system is indicated by one or more of the following:

• The readiness light (same light as for front airbag system) will either flash or stay lit.
• The readiness light will not illuminate immediately after ignition is turned on.
• A series of five beeps will be heard. The tone pattern will repeat periodically until the problem and/or light are repaired.

If any of these things happen, even intermittently, have the SRS serviced at your authorized dealer immediately. Unless serviced, the system may not function properly in the event of a collision.

    How does the Safety Canopy System work?
    The design and development of the Safety Canopy system included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag Technical Worki ...

    SOS Post-Crash Alert Systemâ„¢
    The system automatically flashes the turn signal lamps and sounds the horn three times at four second intervals in the event of a serious impact that deploys an airbag (front, side, side curtain [if ...

    See also:

    Head restraints
    Head restraints are provided for all seats. Front seats 1 Up Pull the head restraints up. 2 Down Push the head restraint down while pushing the lock release button. Second seats 1 Up Pul ...

    Types of booster seats
    There are generally two types of belt-positioning booster seats: backless and high back. Always use booster seats in conjunction with the vehicle lap/shoulder belt. • Backless booster seats If ...

    Difference between screen and actual road
    The distance markers show the distance for a level road when the vehicle is not loaded. It may be different from the actual distance depending on the loading conditions or road conditions. ...