Subaru Forester: Cooling or dehumidifying
Cooling or dehumidifying
1) ON position
For cooling and dehumidification of the
passenger compartment, performing the
following steps will allow air to flow
through the instrument panel outlets:
1. Set the air inlet selection button to the
OFF position.
2. Set the airflow control dial to the “” position.
3. Set the air conditioner button to the “ON” position.
4. Set the temperature control dial to the blue side.
5. Set the fan speed control dial at the highest speed.
Defrosting or defogging
Defrosting or defogging To direct warm air to the windshield and front door windows: 1. Set the airflow control dial to the “” position. 2. Set the temperature control dial to the red ...See also:
Error Messages
If Disc Error displays and/or the disc comes out, it could be for one of the
following reasons:
○ The disc has an invalid or unknown format.
○ The disc is very hot. Try the disc again ...
Ignition Switch Light
The ignition switch light comes on
when you open the driver’s door. It
fades out in about 30 seconds after
the door is closed. ...
Personal/interior lights
Type A
On/off
Type B
On/off ...