Ford Escape: Compass zone adjustment - Electronic compass (if equipped) - Driver Controls - Ford Escape Owner's ManualFord Escape: Compass zone adjustment

1. Determine which magnetic zone you are in for your geographic location by referring to the zone map.
2. Turn ignition to the on position.
3. Start the engine.

4. Press the SETUP control to select

4. Press the SETUP control to select the Update Zone function and display the current ZONE XX in the center stack display.

5. Continue to press the RESET

5. Continue to press the RESET control until the correct zone appears in the center stack display.

6. The direction will display after

6. The direction will display after the RESET control is released. The zone is now updated.

Compass calibration adjustment

    Electronic compass (if equipped)
    The compass heading is displayed in the center stack display. The compass reading may be affected when you drive near large buildings, bridges, power lines and powerful broadcast antenna. Magnetic ...

    Compass calibration adjustment
    Perform compass calibration in an open area free from steel structures and high voltage lines. For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) an ...

    See also:

    Parking Tips
    Make sure the moonroof (if equipped) and the windows are closed. Turn off the lights. Place any packages, valuables, etc. in the cargo area or take them with you. Lock the doors and the tail ...

    Information about uniform tire quality grading
    Tire Quality Grades apply to new pneumatic passenger car tires. The Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For exampl ...

    Tire rotation
    Your vehicle has no required tire rotation. Tire wear is affected by a number of factors such as tire inflation, ambient temperature, driving style, etc. NOTE • If the tires are rotated, the ...