Nissan Rogue: Clearing the programmed information - HomeLink® Universal Transceiver (if so equipped) - Instruments and controls - Nissan Rogue Owner's ManualNissan Rogue: Clearing the programmed information

Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds).

    Programming trouble-diagnosis
    If HomeLink® does not quickly learn the handheld transmitter information: - replace the hand-held transmitter batteries with new batteries. - position the hand-held transmitter with its batt ...

    Reprogramming a single HomeLink® button
    To reprogram a HomeLink® Universal Transceiver button, complete the following. 1. Push and hold the desired HomeLink® button. Do not release the button until step 4 has been completed. 2. Wh ...

    See also:

    Important safety notes
    WARNING If you tow the vehicle, you must use a rigid towing bar if: the engine is not running. there is a brake system malfunction. there is a malfunction in the power supply or the vehi ...

    Starting a disabled vehicle using booster cables
    Rotating parts of the engine can cause serious injury. Take extreme care when working near rotating parts of the engine. Before attempting to start the disabled vehicle, make sure that the par ...

    Summary
    • The camera is activated when the gear selector is moved to R (this can be changed in the MY CAR menu) and the image is shown on the center console display. • When backing up, two solid li ...