Jeep Liberty: CD/DVD Disc Maintenance - Understanding Your Instrument Panel - Jeep Liberty Owner's ManualJeep Liberty: CD/DVD Disc Maintenance

To keep a CD/DVD in good condition, take the following precautions:

1. Handle the disc by its edge; avoid touching the surface.

2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge.

3. Do not apply paper or tape to the disc; avoid scratching the disc.

4. Do not use solvents such as benzene, thinner, cleaners, or anti-static sprays.

5. Store the disc in its case after playing.

6. Do not expose the disc to direct sunlight.

7. Do not store the disc where temperatures may become too high.

NOTE: If you experience difficulty in playing a particular disc, it may be damaged (i.e., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service.

    CD Player
    Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track, or to the beginning of the previous ...

    Radio Operation And Mobile Phones
    Under certain conditions, the mobile phone being on in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the mobile ...

    See also:

    Specifications
    The specifications given here are for general information only. Please check with an authorized Kia dealer for more precise and more up-to-date information. ...

    Brake pad and lining
    While maintaining a speed of 30 to 40 mph (50 to 65 km/h), step on the brake pedal lightly. Repeat this five or more times. ...

    Operating Instructions — Voice Command System (If Equipped)
    For the radio, Refer to “Voice Command” in the Uconnect™ User Manual located on the DVD for further details. ...